Power Plant Projects
Automation of DM & Softening Plant for Indocan Engineering System Ltd, Pune
GEIP Series 90- 30 with 400 DI/Dos and 32 AI were used for controlling the complete operation of DM & Softening plant. The control and sequential operation of whole plant was performed using GEIP SCADA software. The PC was interfaced with PLC through Ethernet network. SCADA software included process control and monito ring through softket and alarm management. System was capable of generating reports/logs like Event activate. Time activated, and operator demand log summaries. System was capable of real time and historical trending. The PLC was provided with bump less Hot Standby Redundancy (HBR). At the modes i.e. Pre Services, Service & Regeneration of DM as well as Softening was controlled through PLC. The PLC system was capable of operating in automatic, semiautomatic, manual control with commands from keyboard. Analog variables such as pH, conductivity, flow, level a ll the tanks were interfaced with PLC. PLC was provided with DCS connectivity to access a PLC data.
Hydel Power generation project (2X5500) KW
Customer
Kirloskar Brother ltd Pune
End User
Ronghli kola hydel power generation station
Location
Sikkim
System consist of PLC Ge-IP Make with SCADA SOFTWARE ON PC Control system was designed to perform
- To control turbine automatically.
- With the help of SCADA Software, such as on /off control can be set and monitor the
Alarms and interlock etc, data logging facility on PC - Digital input-64, digital output 36
( 2X5500 ) KW HYDRO POWER PLANT AT KONAL
Customer
Kirloskar brother ltd pune
End User
Govt of Maharashtra irrigation dept
Contractor
Mahalaxmi Vidyut pvt ltd pune
Location
KONAL
System consist of PLC Ge-IP Make with SCADA SOFTWARE ON PC Control system was designed to perform
- To control turbine automatically.
- With the help of SCADA Software, such as on /off control can be set and monitor the Alarms and interlock, temperature and power monitoring etc, data logging facility on PC
- Digital input-64, digital output 36
- Power meter on modbus and temperature scanner on modbus communication are Involved in this project for data monitoring and control action further.
Compressor Automation
Customer
Kirloskar Pneumatic ltd pune
End User
West Bangal Power development corporation
Consultant
BHEL
Location
West Bangal
Application Requirement
To control the Four no. of compressor from SCADA And locally from Control desk
System consist of PLC Ge-IP Make with SCADA SOFTWARE ON PC Control system was designed to perform
- To control the Compressor qty 4 no Along with Air drying Plant 4 no Combine control from plc .
- With the help of SCADA , parameters such as on /off control can be set and monitor the Alarms and pressure, flow etc for the compressed air .
- ADP plant is controlled on modbus communication.
- Total I/o count – Digital Input – 196, digital output- 160, Analog input -64 RTD -24
